1.
a)Open AutoCAD application from desktop shortcut icon or start menu.
b)Click on “New icon” and select “acad” template file then click on “Open” button to start new document.
2.Type “LAYER” command and press ENTER KEY.
Create two layers with given settings like shown below.
3.Select “Layer 0” and create “A” letter and a circle rounded with it.
4.Select “WINTAB-B” layer form layer list and create “B” letter with surrounded circle.
5.Select “Layer 0” and create “C” letter with surrounded circle.
6.Type “BLOCK” and press ENTER KEY.
7.Create “WINTAG-A” as block name.
8.Click on “Pick point” button from Base point area.
9.Pick center point of the circle surrounded with “A” and press ENTER KEY.
10.Click on “Select objects” button from objects area.
11.Select both “A” and surrounded circle and press ENTER KEY.
12.Now turn on “Convert to block” radio button.
13.Tick mark ON for “Annotation” check box.
14.Then click on “OK” button.
15.Again do the steps like shown below.
16.Save the document by clicking on “Save” icon from quick access menu.
a)Open AutoCAD application from desktop shortcut icon or start menu.
b)Click on “New icon” and select “acad” template file then click on “Open” button to start new document.
2.Type “LAYER” command and press ENTER KEY.
Create two layers with given settings like shown below.
3.Select “Layer 0” and create “A” letter and a circle rounded with it.
4.Select “WINTAB-B” layer form layer list and create “B” letter with surrounded circle.
5.Select “Layer 0” and create “C” letter with surrounded circle.
6.Type “BLOCK” and press ENTER KEY.
7.Create “WINTAG-A” as block name.
8.Click on “Pick point” button from Base point area.
9.Pick center point of the circle surrounded with “A” and press ENTER KEY.
10.Click on “Select objects” button from objects area.
11.Select both “A” and surrounded circle and press ENTER KEY.
12.Now turn on “Convert to block” radio button.
13.Tick mark ON for “Annotation” check box.
14.Then click on “OK” button.
15.Again do the steps like shown below.
16.Save the document by clicking on “Save” icon from quick access menu.